R-1007-08 Steel Pipe Security Bollard (8-5/8 in)

SECTION 34 71 13

VEHICLE BARRIERS

STEEL PIPE SECURITY POSTS

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Security posts
   2. Related Requirements:
      1. [Division 03 Sections: [Concrete] [Mortar] fill for security posts.]
2. REFERENCE STANDARDS
   1. ASTM A500 B – Standard Specification for Structural Grade Steel.
   2. ASTM A536 – Standard Specification for Ductile Iron Castings.
   3. ASTM B26 – Standard Specification for Aluminum-Alloy Sand Castings.
3. SUBMITTALS
   1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
   2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
   5. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
   6. Warranty Documentation: Submit sample of manufacturer’s warranty.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. SECURITY POSTS
   1. Bollard [Designer’s Designation]:
      1. Model: Reliance Foundry; r-1007-08.
      2. Height: 84 in (213.4 cm)
      3. Diameter: 8-5/8 in (21.9 cm)
      4. Weight: 200 lbs (90.7 kg)
      5. Design: Steel pipe bollard.
      6. Bollard Material: ASTM A500 B Structural Grade Steel
      7. Country of Origin: [United States][China]
      8. Finish: [Primer coated][Galvanized]
      9. Color Coating:
         1. Type: Primer
         2. Color: [Red]
      10. Installation:
          1. Fixed, new concrete.
          2. Fixed, existing concrete.

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
   3. Security Posts:
      1. Embed with grout in formed or cored holes in concrete.
      2. Embed in concrete footings.
3. CLEANING & PROTECTION
   1. Protect bollards against damage.
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. Touch up damaged finishes according to manufacturer’s instructions.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION