Bike Lockers

SECTION 12 93 14

BICYCLE LOCKERS

GENERAL

1. SUMMARY
   1. Section Includes: Bicycle lockers
2. ACTION SUBMITTALS
   1. Manufacturer's Product Data
   2. LEED Submittals:
      1. Credit SS 4.2, Alternative Transportation – Bicycle Storage and Changing Rooms:
         Provide product data indicating number of bicycles stored by each bicycle storage unit. Include statement indicating total number of bicycle storage units and total number of bicycles stored.
   3. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
3. CLOSEOUT SUBMITTALS
   1. Manufacturer's Maintenance Instructions for field touch-up of finishes, cleaning, and maintenance.
   2. Warranty Documentation: Submit sample of manufacturer's warranty.
4. DELIVERY, STORAGE, AND HANDLING
   1. Protect bicycle lockers and accessories during delivery, storage, and handling to comply with manufacturer’s instructions and prevent damage.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bike-parking/bike-lockers
      4. Email: [email protected]liance-foundry.com
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. BIKE LOCKERS
   1. Material: Material: High Density Polyethylene (HPDE) and Medium Density Polyethylene (MPDE).
      1. Doors: HDPE octene copolymer, with insulation foam.
         1. Flexural Modulus: 119,500 psi minimum.
         2. Tensile Strength: 4,250 psi minimum.
         3. Insulation: Foamable polyethylene micropellets.
      2. Body: MDPE hexane copolymer.
         1. Flexural Modulus: 110,230 psi minimum.
         2. Tensile Strength: 3,000 psi minimum.
   2. Country of Origin: Canada
   3. Reliance Foundry Model r-8285:
      1. Size
         1. Height: 48 in (121.9 cm)
         2. Length: 80 in (203.2 cm)
         3. Width (front): 36 in (91.4 cm)
         4. Width (rear): 11 in (27.9 cm)
         5. Weight: 163 lbs (73.9 kg)
      2. Installation: [Surface mounting using drop-in anchors with internal bolts]
      3. Color: [Charcoal Black]
      4. Door Hardware
         1. Two-point latching level of galvanize steel
         2. Solid door-locking mechanism using single padlock
         3. Stainless steel door stop plate

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bicycle lockers.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation requirements and setting drawings.
   2. Install according to manufacturer's written instructions by concrete insert method.
   3. Do not install damaged, cracked, chipped, deformed, or marred bicycle lockers. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bicycle lockers that cannot be field repaired.
3. CLEANING & PROTECTION
   1. Immediately prior to Substantial Completion, clean bicycle lockers in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   2. Protect bicycle lockers against damage.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION