R-7902 Steel Bollard

SECTION 32 39 13.21

SURFACE MOUNT METAL BOLLARDS

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Surface mount metal bollards.
      2. Accessories
      3. [_________________]
   2. Related Requirements:
      1. [Division 03 Sections: [Concrete] [Mortar] fill for security posts.]
      2. [Division 08 Sections: Padlocks.]
      3. [_________________]
2. REFERENCE STANDARDS
   1. ASTM A36 – Standard Specification for Carbon Structural Steel.
   2. ASTM A312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes.
   3. ASTM A500 – Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes.
   4. ASTM A536 – Standard Specification for Ductile Iron Castings.
   5. ASTM B26 – Standard Specification for Aluminum-Alloy Sand Castings.
3. SUBMITTALS
   1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
   2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
   5. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
   6. Warranty Documentation: Submit sample of manufacturer’s warranty.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. SURFACE MOUNT METAL BOLLARDS
   1. Material: ASTM A36; 25 percent recycled-material content.
   2. Country of Origin: China
   3. Bollard [Designer’s Designation]:
      1. Model: Reliance Foundry; r-7902.
      2. Height: 36 in (91.4 cm)
      3. Diameter: 4-1/3 in (10.9 cm)
      4. Weight: 29 lbs (13.2 kg)
      5. Design: Cylindrical with rounded top.
      6. Color Coating:
         1. Type: Polyester powder coat over epoxy primer.
         2. Color: [Black textured semi gloss.] [Dark green.] [Statuary bronze.] [Bengal silver.] [Anodized silver.] [Safety yellow.]
      7. Reflective Stripe: [White][Yellow][Blue][None]
      8. Installation:
         1. Fixed, new concrete, embedded.
         2. Fixed, existing concrete, flange, surface mount.
         3. Removable, new concrete, receiver.
            1. [Steel] [Stainless Steel] receiver with lid.
            2. [Steel] [Stainless Steel] receiver with chain.
         4. Removable, existing concrete, receiver.
            1. [Steel] [Stainless Steel] receiver with lid
            2. [Steel] [Stainless Steel] receiver with chain.
            3. Collapsible, steel surface-mount with hinged receiver and padlock hasp.
3. ACCESSORIES
   1. Security Post: Steel pipe, ASTM A500, Grade B.
      1. Manufacturer: Reliance Foundry Co. Ltd.
      2. Country of Origin: United States.
      3. Finish: [Red][Gray] primer.
      4. Installation:
         1. Direct embed.
         2. Footing and fill; Concrete or mortar, [3000 psi minimum.]
   2. Padlock:
      1. [Brass] [Marine Grade], supplied [supplied by bollard manufacturer] [as specified in Section [__ __ __]]. [Key alike.]
   3. Chain:
      1. 5/16-inch galvanized steel chain, Grade 30, with quick-release type connections.] Provide sufficient lengths to provide drape [shown on Drawings.] [acceptable to Architect.]
      2. Chain Eye: 5/16-inch diameter steel.
      3. Quick Links: Powder coated chain links with barrel nut closures.
      4. Finish: Powder coated to match bollard finish. [_______________.]

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. Do not install damaged, cracked, chipped, deformed or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
3. CLEANING & PROTECTION
   1. Protect bollards against damage.
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. Touch up damaged finishes according to manufacturer’s instructions.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION