GENERAL
- SUMMARY
- Section Includes:
- Precast concrete bollards.
- Accessories
- Related Requirements:
- [Any Division 32 Section with "Bollards" in the title or Section 32 41 00 “Bollards” for bollards other than precast concrete bollards specified herein.]
- REFERENCE STANDARDS
- ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing.
- ASTM C825 - Standard Specification for Precast Concrete Barriers.
- ASTM C979 - Standard Specification for Pigments for Integrally Colored Concrete.
- SUBMITTALS
- Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
- Product Data: Provide for each type of bollard specified.
- Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
- Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
- Warranty Documentation: Submit sample of manufacturer’s warranty.
- QUALITY ASSURANCE
- Comply with Section [01 43 00 – Quality Assurance.] [_________.]
- DELIVERY, STORAGE, AND HANDLING
- Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
- Protect bollards and accessories during delivery, storage, and handling.
PRODUCTS
- MANUFACTURERS
- Manufacturer: Reliance Foundry Co. Ltd.
- Phone: 604-547-0460 or 1-877-789-3245
- Fax: 604-590-8875
- Website: https://www.reliance-foundry.com/bollard
- Email: [email protected]
- Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
- PRECAST CONCRETE BOLLARDS
- Material:
- Concrete: Precast concrete with 5200-psi (36 MPa) minimum compressive strength.
- Components: ASTM C150, Type I or III cement, with ASTM C33 aggregate.
- Pigments: ASTM C979, natural mineral oxide pigments, temperature-stable and non-fading.
- Reinforcing: ASTM A 615/A 615M, Grade 60 (Grade 420), deformed.
- Steel Pipe: ASTM A 500, Grade B.
- Country of Origin: Canada
- Installation: Direct Imbed.
- Precast Concrete Bollard [Designer’s Designation]:
- Model: Reliance Foundry; r-9703.
- Height: 32 in (81.3 cm)
- Base Dimension: 24 in x 24 in in (61 cm x 61 cm cm)
- Weight: 1200 lbs (544.3 kg)
- Color: Mixed/Granite.
- Finish: Exposed Aggregate.
- Optional Finish: High-Gloss Acrylic Sealer.
- ACCESSORIES
- Installation Materials:
- Grout: Non-shrink, non-ferrous grout.
EXECUTION
- EXAMINATION
- Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
- Proceed with installation only after unsatisfactory conditions have been corrected.
- INSTALLATION
- General: Comply with manufacturer’s installation instructions and setting drawings.
- Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
- Direct Imbed: Support bollard during concrete placement and cure.
- CLEANING & PROTECTION
- Protect bollards against damage.
- Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
- Touch up damaged finishes according to manufacturer’s instructions.
- CLOSEOUT ACTIVITIES
- Provide executed warranty.
END OF SECTION
Copyright 2020 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products.