R-9704-36 Concrete Bollard

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Precast concrete bollards.
      2. Accessories
   2. Related Requirements:
      1. [Any Division 32 Section with "Bollards" in the title or Section 32 41 00 “Bollards” for bollards other than precast concrete bollards specified herein.]
2. REFERENCE STANDARDS
   1. ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing.
   2. ASTM C825 - Standard Specification for Precast Concrete Barriers.
   3. ASTM C979 - Standard Specification for Pigments for Integrally Colored Concrete.
3. SUBMITTALS
   1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
   2. Product Data: Provide for each type of bollard specified.
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
   5. Warranty Documentation: Submit sample of manufacturer’s warranty.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. PRECAST CONCRETE BOLLARDS
   1. Material:
      1. Concrete: Precast concrete with 5200-psi (36 MPa) minimum compressive strength.
         1. Components: ASTM C150, Type I or III cement, with ASTM C33 aggregate.
         2. Pigments: ASTM C979, natural mineral oxide pigments, temperature-stable and non-fading.
      2. Reinforcing: ASTM A 615/A 615M, Grade 60 (Grade 420), deformed.
      4. Steel Pipe: ASTM A 500, Grade B.
   2. Country of Origin: Canada
   3. Installation: Direct Imbed.
   4. Precast Concrete Bollard [Designer’s Designation]:
      1. Model: Reliance Foundry; r-9704-36.
      2. Height: 36 in (91.4 cm)
      3. Base Diameter: 11 in (27.9 cm)
      4. Base Dimension: in ( cm)
      5. Weight: 310 lbs (140.6 kg)
      6. Color: Mixed/Granite.
      7. Finish: Exposed Aggregate.
      8. Optional Finish: High-Gloss Acrylic Sealer.
3. ACCESSORIES
   1. Installation Materials:
      1. Grout: Non-shrink, non-ferrous grout.

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
   3. Direct Imbed: Support bollard during concrete placement and cure.
3. CLEANING & PROTECTION
   1. Protect bollards against damage.
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. Touch up damaged finishes according to manufacturer’s instructions.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION