SECTION 34 71 19.16

FLEXIBLE VEHICLE DELINEATORS

FLEXIBLE BOLLARDS

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Flexible bollards.
      2. Accessories.
      3. [_________________]
   2. Related Requirements:
      1. Division 03 Sections: [Concrete] [Mortar] fill for security posts.]
      2. [Division 08 Sections: Padlocks.]
      3. [_________________]
2. SUBMITTALS
   1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
   2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
   5. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
   6. Warranty Documentation: Submit sample of manufacturer’s warranty.
3. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
4. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. FLEXIBLE BOLLARDS
   1. Material: Polyurethane.
      1. Thermal stability: Good +/- 10 SHORE D.
      2. Working Temperature: -40°C / + 60°C.
      3. Fire resistance: CLASS E. As per UNE-EN-ISO 11925-2:2002
   2. Performance Requirements:
      1. Impact resistance: Test of 50 impacts, bending the bollard through 90°, simulating a 1500kg vehicles at 15km/h.
      2. Fatigue resistance: Test of 500 impacts, bending the bollard through 45°, at intervals of 30 seconds.
   3. Country of Origin: Spain
   4. Flexible Bollard [Designer’s Designation]:
      1. Model: Reliance Foundry; r-8351.
      2. Height: 40 in (101.6 cm)
      3. Diameter: 5 in (12.7 cm)
      4. Weight: 12 lbs (5.4 kg)
      5. Design: Cylindrical with rounded top.
      6. Color: [Traffic Yellow] [Traffic Orange] [Traffic Red] [Night Blue] [Turquoise Green] [ Stone Gray] [Chocolate Brown] [Jet Black]
      7. Reflective Tape: [Red] [White] [Yellow] [None]
      8. Installation:
         1. Embedded, new concrete
3. ACCESSORIES
   n/a

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. Do not install damaged, cracked, chipped, deformed or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
3. CLEANING & PROTECTION
   1. Protect bollards against damage.
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. Touch up damaged finishes according to manufacturer’s instructions.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION