SECTION 34 71 13
VEHICLE BARRIERS
STEEL PIPE SECURITY POSTS
GENERAL
- SUMMARY
- Section Includes:
- Security posts
- Related Requirements:
- [Division 03 Sections: [Concrete] [Mortar] fill for security posts.]
- REFERENCE STANDARDS
- ASTM A500 B – Standard Specification for Structural Grade Steel.
- ASTM A536 – Standard Specification for Ductile Iron Castings.
- ASTM B26 – Standard Specification for Aluminum-Alloy Sand Castings.
- SUBMITTALS
- Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
- Product Data: Provide for each type of bollard, component, finish, and accessory specified.
- Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
- Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
- Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
- Warranty Documentation: Submit sample of manufacturer’s warranty.
- QUALITY ASSURANCE
- Comply with Section [01 43 00 – Quality Assurance.] [_________.]
- DELIVERY, STORAGE, AND HANDLING
- Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
- Protect bollards and accessories during delivery, storage, and handling.
PRODUCTS
- MANUFACTURERS
- Manufacturer: Reliance Foundry Co. Ltd.
- Phone: 604-547-0460 or 1-877-789-3245
- Fax: 604-590-8875
- Website: https://www.reliance-foundry.com/bollard
- Email: [email protected]
- Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
- SECURITY POSTS
- Bollard [Designer’s Designation]:
- Model: Reliance Foundry; r-1007-06.
- Height: 84 in (213.4 cm)
- Diameter: 6-5/8 in (16.8 cm)
- Weight: 133 lbs (60.3 kg)
- Design: Steel pipe bollard.
- Bollard Material: ASTM A500 B Structural Grade Steel
- Country of Origin: [United States][China]
- Finish: [Primer coated][Galvanized]
- Color Coating:
- Type: Primer.
- Color: [Red]
- Installation:
- Fixed, new concrete.
- Fixed, existing concrete.
EXECUTION
- EXAMINATION
- Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
- Proceed with installation only after unsatisfactory conditions have been corrected.
- INSTALLATION
- General: Comply with manufacturer’s installation instructions and setting drawings.
- Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
- Security Posts:
- Embed with grout in formed or cored holes in concrete.
- Embed in concrete footings.
- CLEANING & PROTECTION
- Protect bollards against damage.
- Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
- Touch up damaged finishes according to manufacturer’s instructions.
- CLOSEOUT ACTIVITIES
- Provide executed warranty.
END OF SECTION
Copyright 2020 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products.