How to Install Bolt-down Bollards
How to Install Reliance Foundry Models R-7182 and R-7183
This page describes the installation method for the following models:
Installation Equipment Required
- Measuring tape
- Hammer drill or rotary hammer
- 5/8” carbide-tipped masonry drill bit
- Setting tool or equivalent flat-end punch
- 5/16” Hex Key
- Torx Key
||Torx socket button head cap bolt*
||Hexagon socket button head cap bolt 1/2”
||Stainless Steel Helical Spring Lock Washer 1/2”
||Stainless steel washer 1/2” OD 1-1/4”
||Drop-in Concrete Insert 1/2"
|*Tamper resistant. Requires special Torx key.
NOTE: Bollards should be left in their packaging until the exact moment of installation
Drop-in Insert Installation
Secure the Bollard Cover
Care and Maintenance
Reliance Foundry manufactures its products to the highest design standards to ensure their durability. In most North American environments, routine inspections and cleaning will ensure that a bollard retains its aesthetic appeal. Proper care and maintenance are required to maintain stainless steel and ensure a full service-life.