R-5001 Cincinnati Trash Can

SECTION 12 93 23

TRASH AND LITTER RECEPTORS

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Waste Bins
      2. [_________________]
2. REFERENCE STANDARDS
   1. ASTM A36 – Standard Specification for Carbon Structural Steel
   2. ASTM A240 – Standard Specification for 316 Stainless Steel
3. SUBMITTALS
   1. Manufacturer’s Product Data
      1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
      2. Product Data: Provide for each type of bench specified.
      3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
      4. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
      5. Warranty Documentation: Submit sample of manufacturer’s warranty.
   2. Setting Drawings: Show items required for work specified by other Sections.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Handle products in accordance with manufacturer’s instructions.
   3. Product shall be delivered fully assembled and ready for installation.
   4. Products should be stored in a clean, dry environment and protected from impact.
6. WARRANTY
   1. Comply with Section [01 78 36 – Warranties.] [_________.]
   2. Provide manufacturer’s standard warranty against defects in materials and workmanship.
      1. Trash Receptors Warranty Period: Two years from the date of invoice, excluding the following products which are expressly excluded from the two-year warranty:
         1. The mechanisms of moving parts and plastic components will be free from defects in material and workmanship for one year from the date of invoice from the Company.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/site-furnishings/city-trash-cans
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. WOOD TRASH RECEPTORS
   1. Wooden Waste Bin [Designer’s Designation]:
      1. Model: Reliance Foundry; r-5001.
      2. Height: 36-5/8 in (93 cm)
      3. Width: 15-1/4 in (38.7 cm)
      4. Capacity: 9.8 gallons (37.1 litres)
      5. Weight: 80 lbs (36.3 kg)
      6. Design: Hardwood slats waste bin.
      7. Material: Structural Steel, Wood
      8. Country of Origin: India
      9. Finish: Traffic white powder coat; Mahogany wood stain
      10. Color Coating:
          1. Type: [Polyester powder coat over epoxy primer.] [IronArmor protective coating.]
          2. Color: [Traffic white.]
      11. Installation:
          1. Surface mount, bolt and anchor.
          2. Rubber floor pads.

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location.
   2. Verify that the substrates are in stable condition and able to support the weight of the trash receptors covered in this section.
   3. Verify that the substrates have been effectively prepared to securely anchor trash receptors that will be surface mounted.
   4. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. For surface mounting, bolt and anchor trash receptors securely in place.
   3. Install in conformance to applicable regional accessibility guidelines and End User’s established accessibility policies.
3. CLEANING & PROTECTION
   1. Clean in accordance with manufacturer’s recommendations.
   2. Protect installed products until completion of project.
   3. Touch up damaged finishes in accordance with manufacturer’s instructions before Substantial Completion.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION