R-9821-FL Solar Bollard

SECTION 32 39 13.17

LIGHTED BOLLARDS

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Solar-powered light bollards.
      2. AC hardwired light bollards.
      3. Accessories
      4. [_________________]
   2. Related Requirements:
      1. [Division 03 Sections: [Concrete] [Mortar] fill for security posts.]
      2. [Division 08 Sections: Padlocks.]
      3. [_________________]
2. REFERENCE STANDARDS
   1. ASTM A36 – Standard Specification for Carbon Structural Steel.
   2. ASTM A312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes.
   3. ASTM A500 – Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes.
   4. ASTM A536 – Standard Specification for Ductile Iron Castings.
   5. ASTM B26 – Standard Specification for Aluminum-Alloy Sand Castings.
   6. CE Mark – Manufacturer’s declaration of compliance with European Union Low Voltage Directive 2006/95/EC.
   7. RoHS – Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment.
3. SUBMITTALS
   1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
   2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
   5. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
   6. Warranty Documentation: Submit sample of manufacturer’s warranty.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.
6. WARRANTY
   1. Comply with Section [01 78 36 – Warranties.] [_________.]
   2. Provide manufacturer’s standard warranty against defects in materials and workmanship.
      1. Warranty Warranty Period: Five years from date of invoice, except as otherwise indicated.
         1. Coatings:Two years, against peeling, cracking, or significant color change.
         2. Solar-Powered Lighting System: Three years.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. LIGHTED BOLLARDS
   1. Material: ASTM A36 steel base; SABIC SLX Lexan polycarbonate dome.
   2. Country of Origin: Australia, China.
   3. Bollard [Designer’s Designation]:
      1. Model: Reliance Foundry; r-9821-fl.
      2. Height: 36 in (91.4 cm)
      3. Diameter: 4-3/8 in (11.1 cm)
      4. Weight: 30 lbs (13.6 kg)
      5. Design: Cylindrical with decorative lighted cap.
      6. Solar Light Cap: Self-contained LED fixture with solar module.
      7. Color Coating:
         1. Type: [Polyester powder coat over epoxy primer.] [IronArmor protective coating.]
         2. Color: [Black textured semi-gloss.] [Dark green.] [Statuary bronze.] [Bengal silver.] [Anodized silver.] [Safety yellow.]
      8. Installation:
         1. Fixed, existing concrete, flanged.
3. ACCESSORIES
   1. Security Post:
      1. Pipe: ASTM A500 B Structural Grade Steel.
      2. Manufacturer: Reliance Foundry Co. Ltd.
      3. Country of Origin: United States.
      4. Finish: [Red][Gray] primer.
      5. Installation:
         1. Direct embed.
         2. Footing and fill; Concrete or mortar, [3000 psi minimum.]
   2. Chain:
      1. 5/16-inch galvanized steel chain, Grade 30, [quick-release connections.] Provide sufficient lengths to provide drape [shown on Drawings.] [acceptable to Architect.]
      2. Chain Eye: 5/16-inch diameter steel.
      3. Quick Links: Powder coated chain links with barrel nut closures.
      4. Finish: Powder coated to match bollard [_______________.]
   3. Padlock:
      1. [Brass] [Marine Grade], supplied [supplied by bollard manufacturer] [as specified in Section [__ __ __]]. [Key alike.]
   4. Solar Battery:
      1. 3.2V 17Ah Cylindrical LiFePo4.
      2. Design Life: 10 Years +
      3. Battery Recycling Program: EnerSys, www.enersys.com.
   5. Solar-Powered Light Fixture: Solar Bollard Lighting
      1. Lamp: Eight high-output Piranha light-emitting diodes (LEDs); 50,000 hours L70 lifetime.
         1. Total Output: 480 lumens.
      2. Solar Module: High-efficiency 5w mono-crystalline cells, encapsulated in high impact, UV resistant polycarbonate.
      3. Housing: SABIC LEXAN 203R, polycarbonate; UV stabilized.
      4. Safety Standards:
         1. CE Mark.
         2. Compliant with RoHS.
         3. IP68.
         4. IK10.
      5. LED Color Temperature: [Warm White, 3000K] [Neutral White, 4300K].
      6. Lighting Distribution: [ASM, Pathway Lighting].

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. Do not install damaged, cracked, chipped, deformed or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
3. CLEANING & PROTECTION
   1. Protect bollards against damage.
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. Touch up damaged finishes according to manufacturer’s instructions.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION