The R-7591 Decorative Bollard features a classic design, suitable for traditional and contemporary environments. R-7591 bollards are made from a versatile ductile iron, featuring decorative fluting and corniced top casting for simple but elegant stature. Bollard surfaces are protected by a durable powder coating, available in 6 standard colors, to prevent wear and corrosion, or upgrade to Reliance Foundry’s superior IronArmor coating for added protection. Use as fixed, stand-alone bollards or cover impact-resistant security posts. Removable mountings are available.
Base Diameter: [4.5 inches] [6.25 inches] [8.625 inches] [10.75 inches]
Finish: [Red] [Gray] primer.
Installation:
Direct embed.
Footing and fill; Concrete or mortar, [3000 psi minimum.]
Padlock:
[Brass] [Marine Grade], supplied [supplied by bollard manufacturer] [as specified in Section [__ __ __]]. [Key alike.]
Chain:
5/16-inch galvanized steel chain, Grade 30, with quick-release type connections.] Provide sufficient lengths to provide drape [shown on Drawings.] [acceptable to Architect.]
Chain Eye: 5/16-inch diameter steel.
Quick Links: Powder coated chain links with barrel nut closures.
Finish: Powder coated to match bollard [_______________.]
Finish: [Powder coated to match bollard [_______________.]] [Satin No. 6, buffed].
EXECUTION
EXAMINATION
Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
Proceed with installation only after unsatisfactory conditions have been corrected.
INSTALLATION
General: Comply with manufacturer’s installation instructions and setting drawings.
Do not install damaged, cracked, chipped, deformed or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
CLEANING & PROTECTION
Protect bollards against damage.
Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
Touch up damaged finishes according to manufacturer’s instructions.
CLOSEOUT ACTIVITIES
Provide executed warranty.
END OF SECTION
Copyright 2020 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products.