Vector S10 Crash-Rated Bollard – R-1010-S10

priced by options

Reliance Foundry’s Vector S10 Bollard delivers certified protection for storefronts, meeting ASTM F3016 S10 standards for low-speed vehicle impact with a P1 penetration rating. Designed for both safety and style, the distinctive form and curved profile enhance strength while distributing impact forces efficiently. With no need for rebar during installation, the Vector S10 simplifies setup, reducing costs without compromising reliability.

Key Features:

  • Certified Protection: Crash-tested to the ASTM F3016 S10 P1 standard.
  • Modern Design: Distinctive form inspired by contemporary architecture.
  • Installation Made Easy: No rebar required—reduced time, labor, and cost.
  • Customizable Aesthetics: Choose from 30+ cover options in cast iron, aluminum, stainless steel, or polyurethane to match your storefront.

Available standalone, or with an optional cover in one of three bundles. When selecting one of our three bundles, you’ll receive a specific cover option tailored to that bundle. If you’d like to swap a cover from the bundle for a different option, please contact our sales team.

Loading...

Select Bundle* Required
Clear selection
Add-Ons Total:
Specifications
Weight (lbs)

117

Function

Fixed Crash-Rated Bollard

Height (in)

65

Material

Steel

Short Form Specs

SECTION 11 12 43

VEHICLE BARRIER SYSTEMS

GENERAL

  1. SUMMARY
    1. Section Includes:
      1. Crash-rated bollards.
      2. [_________________]
    2. Related Requirements:
      1. [Section 03 30 00: Cast-in-Place Concrete]
      2. [Section 28 13 63 - Access Control Vehicle Identification System]
      3. [_________________]
  2. REFERENCE STANDARDS
    1. Department of Defense (DoD) approved and listed on Anti-Ram Vehicle Barrier List
  3. SUBMITTALS
    1. Manufacturer’s Product Data
      1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
      2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
      3. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
      4. Warranty Documentation: Submit sample of manufacturer’s warranty.
    2. Setting Drawings: Show embedded items and cutouts required for work specified by other Sections.
  4. QUALITY ASSURANCE
    1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
  5. DELIVERY, STORAGE, AND HANDLING
    1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
    2. Protect bollards and accessories during delivery, storage, and handling.
  6. WARRANTY
    1. Comply with Section [01 78 36 – Warranties.] [_________.]

PRODUCTS

  1. MANUFACTURERS
    1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
    2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
  2. CRASH-RATED BOLLARDS
    1. Crash-rated bollard [Designer’s Designation]:
        1. Model: Reliance Foundry; R-1010-S10.
        2. Height: 65 inches (165.1 cm)
        3. Height Above Grade: 32 in (81.3 cm)
        4. Height Below Grade: 33 in (83.8 cm)
        5. Max Width: 5 7/8 inches (14.9 cm)
        6. Weight: 117 lbs. (53.1 kg)
        7. Design: S10 crash-rated bollard.
        8. Material: Steel.
        9. Country of Origin: Vietnam.
        10. Finish: Hot-dip Galvanized.
    2. Installation:
      1. Concrete Embedded

EXECUTION

  • EXAMINATION
    1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
    2. Proceed with installation only after unsatisfactory conditions have been corrected.
  • INSTALLATION
    1. General: Comply with manufacturer’s installation instructions and setting drawings.
    2. Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
  • CLEANING & PROTECTION

    Normal cleaning may be done with clean water and a soft cloth. Detailed cleaning and inspection instructions are available at www.reliance-foundry.com/bollard/maintenance-bollards.

    1. Protect bollards against damage.
    2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
    3. Touch up damaged finishes according to manufacturer’s instructions.
  • CLOSEOUT ACTIVITIES
    1. Provide executed warranty.

END OF SECTION

Copyright 2020 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products.