R-1009-04-R M30 Removable Crash-Rated Bollards

USD $3,014.00

R-1009-04-R ASTM M30 crash-rated bollards by Reliance Foundry can be relied upon to stop dangerous vehicle intrusion into pedestrian-friendly zones. This anti-ram bollard is certified to ASTM F2656-07 M30 P1 with the ability to stop a 15,000-pound vehicle travelling at 30 mph. Although crash-rated, installing these security bollards is simple and convenient—no assembly or specialty subgrade required. Crash-rated bollards ship pre-assembled and will not require any welding or bolting. Removing the bollard is easy; simply insert a lifting handle through the top of the bollard and use a forklift to lift the bollard out of the bollard sleeve. Consider decorative covers to enhance aesthetics.

QtyUSD$
1 - 93,014
10 - 492,932
50 +2,884
Add to quote

If you require more resource materials, please contact our customer service department.

Weight (lbs)

410
Function

Removable Crash-Rated Bollard
Height (in)

72
Body Diameter (in)

8-5/8
Base Diameter (in)

8-5/8
Material

Steel

    SECTION 11 12 43

    VEHICLE BARRIER SYSTEMS

    GENERAL

    1. SUMMARY
      1. Section Includes:
        1. Crash-rated bollards.
        2. [_________________]
      2. Related Requirements:
        1. [Section 03 30 00: Cast-in-Place Concrete]
        2. [Section 28 13 63 - Access Control Vehicle Identification System]
        3. [_________________]
    2. REFERENCE STANDARDS
      1. Department of Defense (DoD) approved and listed on Anti-Ram Vehicle Barrier List
    3. SUBMITTALS
      1. Manufacturer’s Product Data
        1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
        2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
        3. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
        4. Warranty Documentation: Submit sample of manufacturer’s warranty.
      2. Setting Drawings: Show embedded items and cutouts required for work specified by other Sections.
    4. QUALITY ASSURANCE
      1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
    5. DELIVERY, STORAGE, AND HANDLING
      1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
      2. Protect bollards and accessories during delivery, storage, and handling.
    6. WARRANTY
      1. Comply with Section [01 78 36 – Warranties.] [_________.]

    PRODUCTS

    1. MANUFACTURERS
      1. Manufacturer: Reliance Foundry Co. Ltd.
        1. Phone: 604-547-0460 or 1-877-789-3245
        2. Fax: 604-590-8875
        3. Website: https://www.reliance-foundry.com/bollard
        4. Email: [email protected]
      2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
    2. CRASH-RATED BOLLARDS
      1. Crash-rated bollard [Designer’s Designation]: R-1009-04-R
        1. Model: Reliance Foundry; r-1009-04-r.
        2. Height: 72 in (182.9 cm)
        3. Diameter: 8-5/8 in (21.9 cm)
        4. Weight: 410 lbs (186 kg)
        5. Design: Crash-rated bollard with flat top.
        6. Material: Steel.
        7. Country of Origin: United States
        8. Finish: Prime paint coated.
        9. Color Coating:
          1. Type: Polyester powder coat over epoxy primer.
          2. Color: [Black]
        10. Installation:
          1. Concrete Embedded

    EXECUTION

    1. EXAMINATION
      1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
      2. Proceed with installation only after unsatisfactory conditions have been corrected.
    2. INSTALLATION
      1. General: Comply with manufacturer’s installation instructions and setting drawings.
      2. Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
    3. CLEANING & PROTECTION

      Normal cleaning may be done with clean water and a soft cloth. Detailed cleaning and inspection instructions are available at www.reliance-foundry.com/bollard/maintenance-bollards.

      1. Protect bollards against damage.
      2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
      3. Touch up damaged finishes according to manufacturer’s instructions.
    4. CLOSEOUT ACTIVITIES
      1. Provide executed warranty.

    END OF SECTION

    Copyright 2020 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products.