R-7172 Decorative Plastic Bollard Cover

SECTION 34 71 13

VEHICLE BARRIERS

PLASTIC SECURITY POST COVERS

GENERAL

1. SUMMARY
   1. Section Includes:
      1. Accessories
      2. Plastic bollard covers.
   2. Related Requirements:
      1. [Division 03 Sections: [Concrete] [Mortar] fill for security posts.]
      2. [Division 32 Section "Bollards" for bollards other than plastic bollard covers specified herein.]
      3. [_________________]
2. REFERENCE STANDARDS
   1. ASTM A500 – Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes.
3. SUBMITTALS
   1. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]
   2. Product Data: Provide for each type of bollard, component, finish, and accessory specified.
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. Setting Drawings: For steel security posts, show foundations and cutouts required in work specified in other Sections.
   5. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.
   6. Warranty Documentation: Submit sample of manufacturer’s warranty.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. DELIVERY, STORAGE, AND HANDLING
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bollard
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. DECORATIVE PLASTIC BOLLARD COVERS
   1. Material: High-density thermoplastic polyethylene (HDPE).
      1. Nominal Wall Thickness: 0.25 inches (6.4 mm)
   2. Country of Origin: U.S.A.
   3. Bollard [Designer’s Designation]:
      1. Model: Reliance Foundry; r-7172.
      2. Design: Cylinder with wide rings.
      3. Height: 53 in (134.6 cm)
      4. Base Diameter: 7-3/4 in (19.7 cm)
      5. Weight: 12 lbs (5.4 kg)
      6. Maximum Interior Post Height: 49 in (124.5 cm)
      7. Maximum Interior Post Diameter: 6-5/8 in (16.8 cm)
      8. Color: [Yellow] [White] [Dark Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].
      9. Installation: Security post, self-adhesive neoprene tape.
3. ACCESSORIES
   1. Self-adhesive foam strips.
   2. Self-adhesive neoprene tape.
   3. Reflective Tape: 2 strips of 3M Scotchlite Reflective Sheeting Series tape, recessed on bollard.
   4. Security Post:
      1. Pipe: ASTM 500 B Structural Grade Steel
      2. Manufacturer: Reliance Foundry Co. Ltd.
      3. Country of Origin: United States.
      4. Base Diameter: [4.5 inches] [6.25 inches] [8.625 inches] [10.75 inches]
      5. Finish: [Red] [Gray] primer.
      6. Installation:
         1. Direct embed.
         2. Footing and fill; Concrete or mortar, [3000 psi minimum.]

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation instructions and setting drawings.
   2. Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
   3. Security Posts:
      1. Embed with grout in formed or cored holes in concrete.
      2. Embed in concrete footings.
   4. Plastic Bollard Covers: Install over foam strips in pattern indicated in manufacturer's instructions.
   5. Decorative Bollard Covers: Install over neoprene adhesive tape as indicated in manufacturer's instructions.
3. CLEANING & PROTECTION
   1. Protect bollards against damage.
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. Touch up damaged finishes according to manufacturer’s instructions.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION