Bolt-down Solar Light Bollard Installation
Step-by-step instructions to install Reliance Foundry R-9811-FL solar light bollards
Reliance Foundry R-9811-FL solar light bollards can be installed on existing concrete with three drop-in concrete inserts. Flange and insert installation is recommended for decorative applications to create architectural perimeters and aesthetically enhance environments. This installation technique offers limited impact resistance.
Installation Equipment Required
- Measuring Tape
- Chalk Line
- Hammer Drill
- 7/8" Masonry Drill Bit
- 3/8" Hex Key
- Setting Tool
- Touch-Up Paint (Available at automotive part stores)
||Flanged Bollard Base
||Solar Light Cap
||Drop-in Concrete Insert 5/8”
||5/8” Stainless Steel Washer
||5/8” Hex Socket Button Head Bolt
||1/4” Tamper Resistant Button Head Bolt
NOTE: Bollards should be left in their packaging until the exact moment of installation.
Drill Anchor Holes
Secure the Bollard
Activate and Secure the Solar Bollard Cap
Care and maintenance
Reliance Foundry manufactures its products to the highest design standards to ensure their durability. Reliance’s bollards are finished with long-lasting powder-coating. In most North American environments, routine inspections and cleaning will ensure that bollards retain their aesthetic appeal. Proper care and maintenance are required to maintain the finish and ensure a full service life.