The R-7173 Decorative Plastic Bollard Cover is designed to protect steel pipe bollards from corrosion and wear—while improving aesthetics to suit surrounding site designs. Covers are made from durable polyethylene and won’t fade or chip from regular exposure to outdoor environments. Install covers with foam compressions strips to prevent tampering and theft. Select from 10 colors and 4 optional reflector strips. Covers can be trimmed to specific lengths. Specify length requirements when requesting a quote.
Installation: Security post, self-adhesive neoprene tape.
Self-adhesive foam strips.
Self-adhesive neoprene tape.
Reflective Tape: 2 strips of 3M Scotchlite Reflective Sheeting Series tape, recessed on bollard.
Pipe: ASTM 500 B Structural Grade Steel
Manufacturer: Reliance Foundry Co. Ltd.
Country of Origin: United States.
Base Diameter: [4.5 inches] [6.25 inches] [8.625 inches] [10.75 inches]
Finish: [Red] [Grey] primer.
Footing and fill; Concrete or mortar, [3000 psi minimum.]
Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.
Proceed with installation only after unsatisfactory conditions have been corrected.
General: Comply with manufacturer’s installation instructions and setting drawings.
Do not install damaged, cracked, chipped, deformed, or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
Embed with grout in formed or cored holes in concrete.
Embed in concrete footings.
Plastic Bollard Covers: Install over foam strips in pattern indicated in manufacturer's instructions.
Decorative Bollard Covers: Install over neoprene adhesive tape as indicated in manufacturer's instructions.
CLEANING & PROTECTION
Protect bollards against damage.
Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
Touch up damaged finishes according to manufacturer’s instructions.
Provide executed warranty.
END OF SECTION
Copyright 2019 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products.