R-8246-SS Stainless Steel Bike Rack

SECTION 12 93 13

BICYCLE RACKS

GENERAL

1. SUMMARY
   1. Section Includes: Bicycle racks.
   2. Related Requirements:
      1. Section 32 39 13.13 – Metal Bike Parking Bollards
2. REFERENCES
   1. Reference Standards:
      1. AAMA 2603 – Pigmented Organic Coatings on Aluminum Extrusions and Panels.
      2. ASTM A36 – Carbon Structural Steel.
      3. ASTM A53 – Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded, and Seamless.
      4. ASTM A312 – Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes.
      5. ASTM A959 – Harmonized Standard Grade Compositions for Wrought Stainless Steels.
3. ACTION SUBMITTALS
   1. Manufacturer's Product Data.
   2. Samples for Initial Selection: Color card of manufacturer's standard colors.
   3. Samples for Verification: Specified finish.
   4. LEED Submittals:
      1. Credit SS 4.2, Alternative Transportation – Bicycle Storage and Changing Rooms: Provide Product Data indicating number of bicycles stored by each bicycle storage unit. Include statement indicating total number of bicycle storage units and total number of bicycles stored.
      2. Credit MR 4, Recycled Content: For products having recycled content, provide Product Data indicating percentages by weight of post-consumer and pre-consumer recycled content. Include statement indicating cost for each product having recycled content.
   5. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.
4. CLOSEOUT SUBMITTALS
   1. Manufacturer's Maintenance Instructions for field touch-up of finishes, cleaning, and maintenance.
   2. Warranty Documentation: Submit sample of manufacturer's warranty.
5. DELIVERY, STORAGE, AND HANDLING
   1. Protect racks and accessories during delivery, storage, and handling to comply with manufacturer’s instructions and prevent damage.

PRODUCTS

1. MANUFACTURERS
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. Fax: 604-590-8875
      3. Website: https://www.reliance-foundry.com/bike-parking
      4. Email: [email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. BICYCLE RACKS
   1. Material: Steel, Stainless Steel.
      1. Steel:
         1. Pipe: ASTM A53, Type F or Type S, Grade A.
         2. Plate, Shapes and Bars: ASTM A36.
         3. Recycled Content of Steel Products: Postconsumer recycled content plus one-half of pre-consumer recycled content not less than 25 percent.
         4. Powder-Coat Finish: AAMA 2603 except with a minimum dry film thickness of 1.5 mils. Comply with coating manufacturer's written instructions.
      2. Stainless Steel: AISI Grade 316.
         1. Pipe: ASTM A312.
         2. Sheet, Strip, and Plate: ASTM A959.
         3. Finish: Buffed Satin Finish No. 6.
   2. Country of Origin: China
   3. Reliance Foundry Model r-8246-ss
      1. Height: 33 in (83.8 cm)
      2. Width: 59 in (149.9 cm)
      3. Weight: 25 lbs (11.3 kg)
      4. Design: Shark fin.
      5. Metal: [Steel] [Stainless Steel].
      6. Installation: [Surface/Flange Mount] [Concrete Embedded, In-ground Mount]
      7. Color: [Textured black] [Dark green] [Statuary bronze] [Bengal silver] [Anodized silver] [Safety yellow]
3. ACCESSORIES
   1. Mounting Accessories
      1. Epoxy adhesive: As recommended in writing by adhesive manufacturer for outdoor use with concrete and steel.
      2. Fasteners
         1. [Standard: 1/2 inch UNC Button Head Bolts, c/w SS Washer.] [As specified.]
         2. Drop in place concrete anchors, for 1/2 inch UNC bolts.
      3. Sealant: Silicone elastomeric sealant recommended for outdoor use.

EXECUTION

1. EXAMINATION
   1. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bicycle racks.
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. INSTALLATION
   1. General: Comply with manufacturer’s installation requirements and setting drawings. Install according to manufacturer's written instructions for specified setting method.
   2. Do not install damaged, cracked, chipped, deformed or marred bicycle racks. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bicycle racks that cannot be field repaired.
3. CLEANING & PROTECTION
   1. Immediately prior to Substantial Completion, clean racks in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   2. Protect bicycle racks against damage.
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

END OF SECTION